peer default ip address – Cisco Command-Line Interface
To specify an IP address, an address from a specific IP address pool, or an address from the Dynamic Host Configuration Protocol (DHCP) mechanism to be returned to a remote peer connecting to this interface, use the peer default ip address command in interface configuration mode. To disable a prior peer IP address pooling configuration on an interface, or to remove the default address from your configuration, use the no form of this command.
peer default ip address {ip-address |Â dhcp-pool |Â dhcp |Â pool [pool-name]}
no peer default ip address
Syntax Description
| ip-address | Specific IP address to be assigned to a remote peer dialing in to the interface. To prevent duplicate IP addresses from being assigned on more than one interface, this argument cannot be applied to a dialer rotary group nor to an ISDN interface. |
| dhcp-pool | Retrieves an IP address from an on-demand address pool. This option only supports remote access (PPP) sessions into MPLS VPNs. |
| dhcp | Retrieves an IP address from the DHCP server. |
| pool | Uses the global default mechanism as defined by the ip address-pool command unless the optional pool-name argument is supplied. This is the default. |
| pool-name | (Optional) Name of a local address pool created using the ip local pool command. DHCP retrieves an address from this pool regardless of the global default mechanism setting. |
Examples
The following command specifies that this interface will use a local IP address pool named pool3:
peer default ip address pool pool3
The following command specifies that this interface will use the IP address 172.19.34.21:
peer default ip address 172.19.34.21
The following command reenables the global default mechanism to be used on this interface:
peer default ip address pool
The following example specifies address 192.168.7.51 for asynchronous interface 6:
line 20
 speed 115200
interface async 6
 peer default ip address 192.168.7.51