Use DHCP for all Active (or Standby) Onboard Administrator—Get the IP address for the Onboard Administrator from a DHCP server. The Standby checkbox is only shown if there is a Standby Onboard Administrator in the enclosure.

Enable Dynamic DNS—Enable using a DNS server to translate host names into IP addresses when using DHCP.

Use static IP settings for each Active (or Standby) Onboard Administrator—Manually set up static IP settings for the Onboard Administrator. The Standby checkbox is only shown if there is a Standby Onboard Administrator in the enclosure.

Field Possible value Description
DNS Host Name 1 to 32 characters including all alphanumeric characters, the dash (-), and the underscore (_). The Onboard Administrator DNS host name. The DNS host name can be assigned when using either DHCP or static IP settings.
IP Address ###.###.###.### where ### ranges from 0 to 255 Static IP address for the Onboard Administrator (required if static IP settings is selected)
Subnet Mask ###.###.###.### where ### ranges from 0 to 255 Subnet mask for the Onboard Administrator (required if static IP settings is selected)
Gateway ###.###.###.### where ### ranges from 0 to 255 Gateway address for the Onboard Administrator (required if static IP settings is selected)
DNS Server 1 ###.###.###.### where ### ranges from 0 to 255 The IP address for the primary DNS server
DNS Server 2 ###.###.###.### where ### ranges from 0 to 255 The IP address for the secondary DNS server

Click Next to save settings.

Post By Editor (2,827 Posts)

Website: →

Connect