network adapter
What are the modes of bonding
You can use it wherever you need redundant links, fault tolerance or load balancing networks. It is the best way to have a high availability network segment. A very useful way to use bonding is to use it in connection with 802.1q VLAN support (your network equipment must have 802.1q protocol implemented). modes of bonding [...]
How to Configure the ICS Host Computer – Windows 2003
The ICS host computer provides a connection through the second network adapter to the existing TCP/IP network. Log on as member of the Administrators group to set up the ICS host computer. Click Start, click Control Panel, and then click Network Connections. Right-click Local Area Connection (the network card that you just installed), and then [...]
How to find your netmask – FreeBSD
It is important to note that in FreeBSD (unlike linux) you will use the correct netmask for all IPs (even aliases) but with FreeBSD you will only need this once. After you have added the first IP the rest of the IPS (aliases) will use netmask 255.255.255.255. The following will guide you to how to [...]
How to setup NIC team on a HP ProLiant DL 380 for fault tolerance and Load Balance
NIC teaming is the process of grouping together several physical NICs into one single logical NIC, which can be used for network fault tolerance and transmit load balance. The process of grouping NICs is called teaming. Teaming has two purposes: • Fault Tolerance: By teaming more than one physical NIC to a logical NIC, high [...]